New user's registration have been closed due to high spamming and low trafic on this forum. Please contact forum admins directly if you need an account. Thanks !

Claire???

Got problems with your B2 or B3? Share and get helped!
Post Reply
carl
Posts: 474
Joined: 07 May 2008, 04:41

Post by carl »

This could be a problem resulted in a wrong preference file for apt in the earliest software release, and in combination of an recent update of php upstream debian, which in combination could have interfered the update.

Could you first check if you have the directory

Code: Select all

/usr/share/bubba-configs/apt
and if so, copy the two files in there to /etc/apt

run thereafter

Code: Select all

apt-get update
now comes the tricky part, try first:

Code: Select all

apt-get install php5-cgi=5.2.0-8+etch11
if that didn't work, try

Code: Select all

apt-get -f install
if that didn't work, a solution can be to try removing the bubba-backend package and remove the php5-cgi package, and after that have suceeded, reinstall the bubba-backend package.

/Carl
/Carl Fürstenberg, Excito Software Developer
http://www.excito.com
support@excito.com
Top
squadra
Posts: 96
Joined: 19 Sep 2008, 09:02

Post by squadra »

Thanks Carl for giving some information much appreciated. But no go for me i get:

during proces:
Setting up apache2-mpm-prefork (2.2.3-4+etch6) ...
Starting web server (apache2)...apache2: Syntax error on line 668 of /etc/apache2/apache2.conf: Could not open configuration file /etc/apache2/sites-enabled/bubba: No such file or directory
failed!

And when it stops it says:

Setting up php5-mysql (5.2.0-8+etch13) ...

Setting up php5-mcrypt (5.2.0-8+etch13) ...

Setting up php5-imap (5.2.0-8+etch13) ...

Setting up php5-gd (5.2.0-8+etch13) ...

Setting up php-pear (5.2.0-8+etch13) ...
Installing new version of config file /etc/pear/pear.conf ...
Errors were encountered while processing:
libapache2-mod-php5
E: Sub-process /usr/bin/dpkg returned an error code (1)
bubba:/etc/apt#


Is this whole updating now fine or do i have to do more?
Top
carl
Posts: 474
Joined: 07 May 2008, 04:41

Post by carl »

squadra wrote:Thanks Carl for giving some information much appreciated. But no go for me i get:

during proces:
Setting up apache2-mpm-prefork (2.2.3-4+etch6) ...
Starting web server (apache2)...apache2: Syntax error on line 668 of /etc/apache2/apache2.conf: Could not open configuration file /etc/apache2/sites-enabled/bubba: No such file or directory
failed!

And when it stops it says:

Setting up php5-mysql (5.2.0-8+etch13) ...

Setting up php5-mcrypt (5.2.0-8+etch13) ...

Setting up php5-imap (5.2.0-8+etch13) ...

Setting up php5-gd (5.2.0-8+etch13) ...

Setting up php-pear (5.2.0-8+etch13) ...
Installing new version of config file /etc/pear/pear.conf ...
Errors were encountered while processing:
libapache2-mod-php5
E: Sub-process /usr/bin/dpkg returned an error code (1)
bubba:/etc/apt#


Is this whole updating now fine or do i have to do more?
That was strange, try reinstall the bubba-frontend package. (apt-get install --reinstall bubba-backend)

/Carl
/Carl Fürstenberg, Excito Software Developer
http://www.excito.com
support@excito.com
Top
squadra
Posts: 96
Joined: 19 Sep 2008, 09:02

Post by squadra »

I decided to use a complete fresh install since other options didn't work also (like mt-daap applet) so then i hope my mt-daap problem is gone too (it crashed everytime).
Top
squadra
Posts: 96
Joined: 19 Sep 2008, 09:02

Post by squadra »

On my fresh installed bubba i get the following using apt-get update:

apt-get update
Ign http://ftp.se.debian.org etch Release.gpg
Ign http://update.excito.org marielle Release.gpg
Ign http://ftp.se.debian.org etch Release
Ign http://update.excito.org upstream_etch Release.gpg
Ign http://update.excito.org marielle Release
Err http://ftp.se.debian.org etch/main Packages
Could not open file /var/lib/apt/lists/partial/ftp.se.debian.org_debian_dists_etch_main_binary-powerpc_Packages - open (30 Read-only file system) [IP: 130.239.18.173 80]
Ign http://update.excito.org upstream_etch Release
Err http://update.excito.org marielle/main Packages
Could not open file /var/lib/apt/lists/partial/update.excito.org_dists_marielle_main_binary-powerpc_Packages - open (30 Read-only file system)
Err http://update.excito.org upstream_etch/main Packages
Could not open file /var/lib/apt/lists/partial/update.excito.org_dists_upstream%5fetch_main_binary-powerpc_Packages - open (30 Read-only file system)
Failed to fetch http://ftp.se.debian.org/debian/dists/e ... ackages.gz Could not open file /var/lib/apt/lists/partial/ftp.se.debian.org_debian_dists_etch_main_binary-powerpc_Packages - open (30 Read-only file system) [IP: 130.239.18.173 80]
Failed to fetch http://update.excito.org/dists/marielle ... ackages.gz Could not open file /var/lib/apt/lists/partial/update.excito.org_dists_marielle_main_binary-powerpc_Packages - open (30 Read-only file system)
Failed to fetch http://update.excito.org/dists/upstream ... ackages.gz Could not open file /var/lib/apt/lists/partial/update.excito.org_dists_upstream%5fetch_main_binary-powerpc_Packages - open (30 Read-only file system)
W: Not using locking for read only lock file /var/lib/apt/lists/lock
W: Not using locking for read only lock file /var/lib/dpkg/lock
E: Unable to write to /var/cache/apt/
E: The package lists or status file could not be parsed or opened.
Top
carl
Posts: 474
Joined: 07 May 2008, 04:41

Post by carl »

squadra wrote:On my fresh installed bubba i get the following using apt-get update:

apt-get update
Ign http://ftp.se.debian.org etch Release.gpg
Ign http://update.excito.org marielle Release.gpg
Ign http://ftp.se.debian.org etch Release
Ign http://update.excito.org upstream_etch Release.gpg
Ign http://update.excito.org marielle Release
Err http://ftp.se.debian.org etch/main Packages
Could not open file /var/lib/apt/lists/partial/ftp.se.debian.org_debian_dists_etch_main_binary-powerpc_Packages - open (30 Read-only file system) [IP: 130.239.18.173 80]
Ign http://update.excito.org upstream_etch Release
Err http://update.excito.org marielle/main Packages
Could not open file /var/lib/apt/lists/partial/update.excito.org_dists_marielle_main_binary-powerpc_Packages - open (30 Read-only file system)
Err http://update.excito.org upstream_etch/main Packages
Could not open file /var/lib/apt/lists/partial/update.excito.org_dists_upstream%5fetch_main_binary-powerpc_Packages - open (30 Read-only file system)
Failed to fetch http://ftp.se.debian.org/debian/dists/e ... ackages.gz Could not open file /var/lib/apt/lists/partial/ftp.se.debian.org_debian_dists_etch_main_binary-powerpc_Packages - open (30 Read-only file system) [IP: 130.239.18.173 80]
Failed to fetch http://update.excito.org/dists/marielle ... ackages.gz Could not open file /var/lib/apt/lists/partial/update.excito.org_dists_marielle_main_binary-powerpc_Packages - open (30 Read-only file system)
Failed to fetch http://update.excito.org/dists/upstream ... ackages.gz Could not open file /var/lib/apt/lists/partial/update.excito.org_dists_upstream%5fetch_main_binary-powerpc_Packages - open (30 Read-only file system)
W: Not using locking for read only lock file /var/lib/apt/lists/lock
W: Not using locking for read only lock file /var/lib/dpkg/lock
E: Unable to write to /var/cache/apt/
E: The package lists or status file could not be parsed or opened.
You must issue that command as root, i.e. first issue the command "su", and after that, issue the password "excito".

/Carl
/Carl Fürstenberg, Excito Software Developer
http://www.excito.com
support@excito.com
Top
Hammer
Posts: 124
Joined: 02 Oct 2007, 13:37

Post by Hammer »

This is what I get:


apt-get update
Get:1 http://ftp.se.debian.org etch Release.gpg [386B]
Get:2 http://update.excito.org marielle Release.gpg [189B]
Hit http://ftp.se.debian.org etch Release
Get:3 http://update.excito.org upstream_etch Release.gpg [189B]
Get:4 http://update.excito.org marielle Release [2693B]
Get:5 http://update.excito.org upstream_etch Release [2651B]
Ign http://ftp.se.debian.org etch/main Packages/DiffIndex
Get:6 http://update.excito.org marielle/main Packages [53.5kB]
Hit http://ftp.se.debian.org etch/main Packages
Hit http://update.excito.org upstream_etch/main Packages/DiffIndex
Fetched 59.2kB in 0s (69.4kB/s)
Reading package lists... Done
thor:/etc/apt# apt-get install php5-cgi=5.2.0-8+etch11
Reading package lists... Done
Building dependency tree... Done
php5-cgi is already the newest version.
You might want to run `apt-get -f install' to correct these:
The following packages have unmet dependencies:
php5-cgi: Depends: php5-common (= 5.2.0-8+etch11) but 5.2.0-8+etch13 is to be installed
E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a s olution).
thor:/etc/apt# apt-get -f install
Reading package lists... Done
Building dependency tree... Done
Correcting dependencies... Done
The following packages will be REMOVED:
bubba-frontend php5-cgi
0 upgraded, 0 newly installed, 2 to remove and 0 not upgraded.
37 not fully installed or removed.
Need to get 0B of archives.
After unpacking 21.9MB disk space will be freed.
Do you want to continue [Y/n]? y
(Reading database ... 28063 files and directories currently installed.)
Removing bubba-frontend ...
dpkg - warning: while removing bubba-frontend, directory `/usr/share/web-admin/a dmin/system/logs' not empty so not removed.
dpkg - warning: while removing bubba-frontend, directory `/usr/share/web-admin/a dmin/system' not empty so not removed.
dpkg - warning: while removing bubba-frontend, directory `/usr/share/web-admin/a dmin' not empty so not removed.
dpkg - warning: while removing bubba-frontend, directory `/usr/share/web-admin' not empty so not removed.
dpkg - warning: while removing bubba-frontend, directory `/var/log/web-admin' no t empty so not removed.
dpkg - warning: while removing bubba-frontend, directory `/etc/lighttpd/conf-ava ilable' not empty so not removed.
dpkg - warning: while removing bubba-frontend, directory `/etc/lighttpd' not emp ty so not removed.
dpkg: php5-cgi: dependency problems, but removing anyway as you request:
wordpress depends on libapache2-mod-php5 | php5 | php5-cgi | libapache2-mod-php 4 | php4 | php4-cgi; however:
Package libapache2-mod-php5 is not configured yet.
Package php5 is not installed.
Package php5-cgi is to be removed.
Package libapache2-mod-php4 is not installed.
Package php4 is not installed.
Package php4-cgi is not installed.
php5-xcache depends on phpapi-20060613+lfs; however:
Package phpapi-20060613+lfs is not installed.
Package libapache2-mod-php5 which provides phpapi-20060613+lfs is not configur ed yet.
Package php5-cli which provides phpapi-20060613+lfs is not configured yet.
Package php5-cgi which provides phpapi-20060613+lfs is to be removed.
Removing php5-cgi ...
Setting up openssh-client (4.3p2-9etch3ex1) ...

Setting up libpq4 (8.1.13-0etch1) ...

Setting up apache2-utils (2.2.3-4+etch6) ...
Setting up apache2.2-common (2.2.3-4+etch6) ...

Setting up apache2-mpm-prefork (2.2.3-4+etch6) ...
Starting web server (apache2)...apache2: Syntax error on line 668 of /etc/apache 2/apache2.conf: Could not open configuration file /etc/apache2/sites-enabled/bub ba: No such file or directory
failed!
invoke-rc.d: initscript apache2, action "start" failed.

Setting up dimp (1.0.0.99.1-1) ...
Setting up libxml2 (2.6.27.dfsg-5) ...

Setting up php5-common (5.2.0-8+etch13) ...
Setting up php5-cli (5.2.0-8+etch13) ...

Setting up php-pear (5.2.0-8+etch13) ...
Installing new version of config file /etc/pear/pear.conf ...
Setting up libapache2-mod-php5 (5.2.0-8+etch13) ...
Your apache2 configuration is broken, so we're not restarting it for you.

Setting up libfreetype6 (2.2.1-5+etch3) ...

Setting up php5-gd (5.2.0-8+etch13) ...

Setting up php5-imap (5.2.0-8+etch13) ...

Setting up php5-mcrypt (5.2.0-8+etch13) ...

Setting up php5-mysql (5.2.0-8+etch13) ...

Setting up bubba-horde (0.0.48) ...
Installing new version of config file /etc/horde/horde3/conf.php ...
Installing new version of config file /etc/horde/apache.conf ...
dbconfig-common: writing config to /etc/dbconfig-common/bubba-horde.conf
Replacing config file /etc/horde/debian-db.php with new version
dbconfig-common: flushing administrative password
invoke-rc.d: unknown initscript, /etc/init.d/lighttpd not found.
apache2: Syntax error on line 668 of /etc/apache2/apache2.conf: Could not open c onfiguration file /etc/apache2/sites-enabled/bubba: No such file or directory
failed!
invoke-rc.d: initscript apache2, action "reload" failed.

Setting up bubba-status (0.99.0-3) ...

Setting up bubba-kernel (2.6.26.5-1) ...
Setting up bubba-modules (2.6.26.5-1) ...

Setting up libcupsys2 (1.2.7-4etch4ex1) ...

Setting up libcupsimage2 (1.2.7-4etch4ex1) ...

Setting up cupsys-common (1.2.7-4etch4ex1) ...
Setting up cupsys (1.2.7-4etch4ex1) ...
Starting Common Unix Printing System: cupsd.

Setting up cupsys-client (1.2.7-4etch4ex1) ...

Setting up openssh-server (4.3p2-9etch3ex1) ...
Restarting OpenBSD Secure Shell server: sshd.

Setting up libssh2-1 (0.18-1) ...

Setting up libcurl3 (7.18.2-5) ...

Setting up ftd (0.8.17-1) ...
Starting Filetransfer daemon: ftd.

Setting up mt-daapd (0.9~r1696-1.3ex5) ...
Installing new version of config file /etc/mt-daapd.conf ...
Starting mt-daapd: invoke-rc.d: initscript mt-daapd, action "start" failed.
dpkg: error processing mt-daapd (--configure):
subprocess post-installation script returned error exit status 1
Setting up libcurl3-gnutls (7.18.2-5) ...

Setting up mediatomb-common (0.11.0-3ex22) ...
Setting up mediatomb-daemon (0.11.0-3ex22) ...
Installing new version of config file /etc/default/mediatomb ...
dbconfig-common: writing config to /etc/dbconfig-common/mediatomb-daemon.conf
dbconfig-common: flushing administrative password
Starting upnp media server: mediatomb* upnp media server 'mediatomb' was already started

Setting up samba-common (3.0.24-6etch10ex1) ...

Setting up samba (3.0.24-6etch10ex1) ...
Starting Samba daemons: nmbd smbd.

dpkg: dependency problems prevent configuration of bubba-backend:
bubba-backend depends on mt-daapd; however:
Package mt-daapd is not configured yet.
dpkg: error processing bubba-backend (--configure):
dependency problems - leaving unconfigured
Errors were encountered while processing:
mt-daapd
bubba-backend
E: Sub-process /usr/bin/dpkg returned an error code (1)
Top
Hammer
Posts: 124
Joined: 02 Oct 2007, 13:37

Post by Hammer »

Then I did the next suggestion:


apt-get install --reinstall bubba-backend
Reading package lists... Done
Building dependency tree... Done
0 upgraded, 0 newly installed, 1 reinstalled, 0 to remove and 0 not upgraded.
2 not fully installed or removed.
Need to get 0B of archives.
After unpacking 0B of additional disk space will be used.
Do you want to continue [Y/n]? y
Setting up mt-daapd (0.9~r1696-1.3ex5) ...
Starting mt-daapd: invoke-rc.d: initscript mt-daapd, action "start" failed.
dpkg: error processing mt-daapd (--configure):
subprocess post-installation script returned error exit status 1
dpkg: dependency problems prevent configuration of bubba-backend:
bubba-backend depends on mt-daapd; however:
Package mt-daapd is not configured yet.
dpkg: error processing bubba-backend (--configure):
dependency problems - leaving unconfigured
Errors were encountered while processing:
mt-daapd
bubba-backend
E: Sub-process /usr/bin/dpkg returned an error code (1)
Top
carl
Posts: 474
Joined: 07 May 2008, 04:41

Post by carl »

Hammer wrote:Then I did the next suggestion:


apt-get install --reinstall bubba-backend
Reading package lists... Done
Building dependency tree... Done
0 upgraded, 0 newly installed, 1 reinstalled, 0 to remove and 0 not upgraded.
2 not fully installed or removed.
Need to get 0B of archives.
After unpacking 0B of additional disk space will be used.
Do you want to continue [Y/n]? y
Setting up mt-daapd (0.9~r1696-1.3ex5) ...
Starting mt-daapd: invoke-rc.d: initscript mt-daapd, action "start" failed.
dpkg: error processing mt-daapd (--configure):
subprocess post-installation script returned error exit status 1
dpkg: dependency problems prevent configuration of bubba-backend:
bubba-backend depends on mt-daapd; however:
Package mt-daapd is not configured yet.
dpkg: error processing bubba-backend (--configure):
dependency problems - leaving unconfigured
Errors were encountered while processing:
mt-daapd
bubba-backend
E: Sub-process /usr/bin/dpkg returned an error code (1)
Sadly I can't test an upgrade from rc7 until monday, but if you want to test further during the weekend, you can try differenct combination of following:

Code: Select all

apt-get remove bubba-backend
dpkg --remove bubba-backend
apt-get upgrade
apt-get -f install
apt-get install bubba-backend
The context is that we need to remove bubba-backend from the system so the breakage is resolved, after the backend has been fully removed, and we are sure that correct source.list and apt-preferences is installed, then you should be able to install it again.

/Carl
/Carl Fürstenberg, Excito Software Developer
http://www.excito.com
support@excito.com
Top
carl
Posts: 474
Joined: 07 May 2008, 04:41

Post by carl »

Ok, here is a procedure, which in my test environment, does work; I'm sorry for all inconvinience.

This procedure assumes that you have tried an update and dist-upgrade first.
  • First log in to the bubba via SSH and change to root (su: excito).
  • issue following:

    Code: Select all

     cp /usr/share/bubba-configs/apt/* /etc/apt/
  • Here I do an intentional semi-failed distupgrade, might not be needed, but anyway. as I force it, you will get the option to remove two packages, answer yes there.

    Code: Select all

    apt-get dist-upgrade -f
  • Now we remove everything that depends on bad packages (except tzdata which is essential), on the removal of horde, answer no here on the removal of database (is an bug in the bubba-horde package I just noticed, that dialog should be there unless purge is in effect).

    Code: Select all

    apt-get remove php5-common libxml2 apache2.2-common libpq4
  • To be sure we don't have any old packages left, issue

    Code: Select all

    apt-get clean
  • To prevent any old php4 to get installed, we install php5 libs first

    Code: Select all

     apt-get install php-date php-db php-file php-http-request php-log php-mail php-mail-mime php-mdb2 php-mdb2-driver-mysql php-net-imap php-net-socket php-net-url php-pear php5-cli php5-common php5-gd php5-imap php5-mcrypt php5-mysql php5-xcache
  • Now we are able to install the frontend again

    Code: Select all

    apt-get install bubba-frontend
you should notice that it only downloads from update.excito.org now, but if you still get stuff from upstream, please tell me, and I look into the issue.

Edit: should be NO on the bubba horde question
/Carl Fürstenberg
/Carl Fürstenberg, Excito Software Developer
http://www.excito.com
support@excito.com
Top
efiggy
Posts: 26
Joined: 21 Aug 2007, 06:38

Post by efiggy »

Hi Carl,

This is the message I got from the last command. The upstream you mentioned is there. What shall I do next?

Regards,

Efiggy

Do you want to continue [Y/n]? Y
Get:1 http://update.excito.org upstream_etch/main libpq4 8.1.11-0etch1 [280kB]
Get:2 http://update.excito.org upstream_etch/main libaprutil1 1.2.7+dfsg-2 [72.1kB]
Get:3 http://update.excito.org upstream_etch/main apache2-utils 2.2.3-4+etch5 [353kB]
Get:4 http://update.excito.org upstream_etch/main apache2.2-common 2.2.3-4+etch5 [1035kB]
Get:6 http://update.excito.org marielle/main horde3 3.2.1+debian0-1ex6 [7162kB]
Top
carl
Posts: 474
Joined: 07 May 2008, 04:41

Post by carl »

efiggy wrote:Hi Carl,

This is the message I got from the last command. The upstream you mentioned is there. What shall I do next?

Regards,

Efiggy

Do you want to continue [Y/n]? Y
Get:1 http://update.excito.org upstream_etch/main libpq4 8.1.11-0etch1 [280kB]
Get:2 http://update.excito.org upstream_etch/main libaprutil1 1.2.7+dfsg-2 [72.1kB]
Get:3 http://update.excito.org upstream_etch/main apache2-utils 2.2.3-4+etch5 [353kB]
Get:4 http://update.excito.org upstream_etch/main apache2.2-common 2.2.3-4+etch5 [1035kB]
Get:6 http://update.excito.org marielle/main horde3 3.2.1+debian0-1ex6 [7162kB]
No, that's fine, what I meant by upstream is that it would start downloading from ftp.se.debian.org or similar.

/Carl
/Carl Fürstenberg, Excito Software Developer
http://www.excito.com
support@excito.com
Top
efiggy
Posts: 26
Joined: 21 Aug 2007, 06:38

Post by efiggy »

After the downoad and installation, This is the only error I got

Setting up apache2-mpm-prefork (2.2.3-4+etch5) ...
Starting web server (apache2)...Syntax error on line 14 of /etc/apache2/conf.d/admin:
Invalid command 'FastCgiExternalServer', perhaps misspelled or defined by a module not included in the server configuration
failed!
invoke-rc.d: initscript apache2, action "start" failed.

Now, I don't have web access. I guess it has something to do with the above error.

Efiggy
Top
efiggy
Posts: 26
Joined: 21 Aug 2007, 06:38

Post by efiggy »

What I mean web access is that, I can't access the bubba admin webpage

If I restart my apache, here is the output

bubba2:/var/log# /etc/init.d/apache2 start
Starting web server (apache2)...(98)Address already in use: make_sock: could not bind to address [::]:80
(98)Address already in use: make_sock: could not bind to address 0.0.0.0:80
no listening sockets available, shutting down
Unable to open logs
failed!

For an unknown reason, lighttpd got installed. I disable lighttpd and start apache2, I can now use the web interface again.

Can you tell me why lightttpd got installed when I followed your latest procedure?

Efiggy
Last edited by efiggy on 10 Nov 2008, 14:22, edited 1 time in total.
Top
carl
Posts: 474
Joined: 07 May 2008, 04:41

Post by carl »

How many times did you get that error? It is fine the first two times, as long at the last time, it goes through, it's due to that php5 cgi isn't fully configured during the forceful reinstallation. you can try following, one or two times:

Code: Select all

apt-get remove --purge bubba-backend
apt-get -f install
apt-get install bubba-frontend
If apt-get cant resolve the issue, one way then is to use dpkg directly to forcefully remove some packages.
First then, could you give me the output of following command:

Code: Select all

dpkg -l | grep -v ^ii
/Carl
/Carl Fürstenberg, Excito Software Developer
http://www.excito.com
support@excito.com
Top
Post Reply

Return to “B2 & B3 Support”