An new image for BubbaServer (B1) is now available at http://update.excito.net/install/bubba- ... nny/image/
As full testing hasn't been possible, please regard this as an pre-release, and further upgrades, if necessary, will be relayed via the upgrade manager.
To install, place the image on an USB stick (the image is 180MB large); Insert the stick into the bubba, and while press the power button, insert the power cord.
/Carl Fürstenberg - excito dev
New user's registration have been closed due to high spamming and low trafic on this forum. Please contact forum admins directly if you need an account. Thanks !
BubbaServer (b1) lenny image
Bubba|TWO Lenny
Hej, thank you for an excellent product. Do you have any idea when Lenny will be released for Bubba|TWO?
/Mattias
/Mattias
I just tried it and found the following problem:
* Time and date is set to 1970 and can not be updated from web interface (Error message is "Unable to update time and date. Please check syntax of entered data." but I doubt that my data is wrong, because I can't even change the current time with a minute)
* Due to the faulty date (I'm assuming) it's not possible to log in to the server via SSH, since the password has "expired" and thus it's not possible changing this manually. I tried setting my computers system time to January 1 1970 but still got the same problem...
What can I do to fix this?
I'm happy to do some debugging, should it be necessary.
* Time and date is set to 1970 and can not be updated from web interface (Error message is "Unable to update time and date. Please check syntax of entered data." but I doubt that my data is wrong, because I can't even change the current time with a minute)
* Due to the faulty date (I'm assuming) it's not possible to log in to the server via SSH, since the password has "expired" and thus it's not possible changing this manually. I tried setting my computers system time to January 1 1970 but still got the same problem...
What can I do to fix this?
I'm happy to do some debugging, should it be necessary.Oh, that wasn't good, gonna look into it asap (was going to install ntp, but hesitated)FoH wrote:I just tried it and found the following problem:
* Time and date is set to 1970 and can not be updated from web interface (Error message is "Unable to update time and date. Please check syntax of entered data." but I doubt that my data is wrong, because I can't even change the current time with a minute)
* Due to the faulty date (I'm assuming) it's not possible to log in to the server via SSH, since the password has "expired" and thus it's not possible changing this manually. I tried setting my computers system time to January 1 1970 but still got the same problem...
What can I do to fix this?
/Carl
Ok, have fixed the problem (was wrong parameter count in backend.pl for set_time), you should be able to use the web upgrade to upgrade the bubba package, and after that it is possible to change the time.carl wrote:Oh, that wasn't good, gonna look into it asap (was going to install ntp, but hesitated)FoH wrote:I just tried it and found the following problem:
* Time and date is set to 1970 and can not be updated from web interface (Error message is "Unable to update time and date. Please check syntax of entered data." but I doubt that my data is wrong, because I can't even change the current time with a minute)
* Due to the faulty date (I'm assuming) it's not possible to log in to the server via SSH, since the password has "expired" and thus it's not possible changing this manually. I tried setting my computers system time to January 1 1970 but still got the same problem...
What can I do to fix this?
/Carl
/Carl Fürstenberg
I confirm that the problem is fixed, date and time was successfully updated and ssh login working again (after anther password change due to "expired" password, since last login was 1970). Great work!Great! I've been waiting for this. But I think I ran in a bug with samba. It is a freshly set up bubba1 with this lenny pre-release.
It is updated to the most recent versions (it needed a "dpkg --configure -a" ), no lenny archives activated. One user has been added to be able to log into bubba with ssh.
A port scan to the bubba says
So as you can see, samba fails to run. Would be great if there are any suggestions. I already tried enableing the lenny packages and defaulting to the lenny samba.conf. But no luck.
It is updated to the most recent versions (it needed a "dpkg --configure -a" ), no lenny archives activated. One user has been added to be able to log into bubba with ssh.
Code: Select all
bubba:/home/mabl# cat /var/log/samba/log.smbd
[1970/01/01 00:27:13, 0] smbd/server.c:main(1213)
smbd version 3.2.5 started.
Copyright Andrew Tridgell and the Samba Team 1992-2008
[1970/01/01 00:27:13, 1] param/loadparm.c:map_parameter(6110)
Unknown parameter encountered: "invalid user"
[1970/01/01 00:27:13, 0] param/loadparm.c:lp_do_parameter(7196)
Ignoring unknown parameter "invalid user"
[1970/01/01 00:27:13, 1] param/loadparm.c:map_parameter(6110)
Unknown parameter encountered: "invalid user"
[1970/01/01 00:27:13, 0] param/loadparm.c:lp_do_parameter(7196)
Ignoring unknown parameter "invalid user"
[1970/01/01 00:27:14, 0] lib/interface.c:load_interfaces(543)
WARNING: no network interfaces found
[1970/01/01 00:27:15, 0] smbd/server.c:open_sockets_smbd(548)
open_sockets_smbd: No sockets available to bind to.
Code: Select all
bubba:/home/mabl# cat /var/log/samba/log.nmbd
[1970/01/01 00:27:13, 0] nmbd/nmbd.c:main(849)
nmbd version 3.2.5 started.
Copyright Andrew Tridgell and the Samba Team 1992-2008
[1970/01/01 00:27:13, 1] param/loadparm.c:map_parameter(6110)
Unknown parameter encountered: "invalid user"
[1970/01/01 00:27:13, 0] param/loadparm.c:lp_do_parameter(7196)
Ignoring unknown parameter "invalid user"
[1970/01/01 00:27:13, 1] param/loadparm.c:map_parameter(6110)
Unknown parameter encountered: "invalid user"
[1970/01/01 00:27:13, 0] param/loadparm.c:lp_do_parameter(7196)
Ignoring unknown parameter "invalid user"
[1970/01/01 00:27:13, 0] lib/interface.c:load_interfaces(543)
WARNING: no network interfaces found
[1970/01/01 00:27:13, 0] nmbd/nmbd_subnetdb.c:create_subnets(206)
create_subnets: No local IPv4 non-loopback interfaces !
[1970/01/01 00:27:13, 0] nmbd/nmbd_subnetdb.c:create_subnets(207)
create_subnets: Waiting for an interface to appear ...
[1970/01/01 00:27:18, 0] lib/interface.c:load_interfaces(543)
WARNING: no network interfaces found
[and so on]
[2009/05/15 22:03:54, 0] lib/interface.c:load_interfaces(543)
WARNING: no network interfaces found
[2009/05/15 22:03:59, 0] lib/interface.c:load_interfaces(543)
WARNING: no network interfaces found
Code: Select all
nmap -PE -PA21,23,80,3389 -A -v -T4 192.168.2.46
Starting Nmap 4.76 ( http://nmap.org ) at 2009-05-15 22:04 CEST
Initiating ARP Ping Scan at 22:04
Scanning 192.168.2.46 [1 port]
Completed ARP Ping Scan at 22:04, 0.02s elapsed (1 total hosts)
Initiating Parallel DNS resolution of 1 host. at 22:04
Completed Parallel DNS resolution of 1 host. at 22:04, 0.00s elapsed
Initiating SYN Stealth Scan at 22:04
Scanning noname (192.168.2.46) [1000 ports]
Discovered open port 80/tcp on 192.168.2.46
Discovered open port 22/tcp on 192.168.2.46
Discovered open port 21/tcp on 192.168.2.46
Discovered open port 25/tcp on 192.168.2.46
Discovered open port 443/tcp on 192.168.2.46
Discovered open port 3689/tcp on 192.168.2.46
Discovered open port 143/tcp on 192.168.2.46
Discovered open port 993/tcp on 192.168.2.46
Discovered open port 10000/tcp on 192.168.2.46
Completed SYN Stealth Scan at 22:05, 0.19s elapsed (1000 total ports)
Initiating Service scan at 22:05
Scanning 9 services on noname (192.168.2.46)
Completed Service scan at 22:06, 116.11s elapsed (9 services on 1 host)
Initiating OS detection (try #1) against noname (192.168.2.46)
SCRIPT ENGINE: Initiating script scanning.
SCRIPT ENGINE: '/usr/share/nmap/scripts/dns-test-open-recursion.nse' threw a run time error and could not be loaded.
SCRIPT ENGINE: '/usr/share/nmap/scripts/skype_v2-version.nse' threw a run time error and could not be loaded.
SCRIPT ENGINE: error while initializing script rules:
/usr/share/nmap/scripts/script.db:20: rpcinfo.nse is not a file!
stack traceback:
[C]: in function 'Entry'
/usr/share/nmap/scripts/script.db:20: in main chunk
[C]: ?
[C]: ?
SCRIPT ENGINE: Aborting script scan.
Host noname (192.168.2.46) appears to be up ... good.
Interesting ports on noname (192.168.2.46):
Not shown: 991 closed ports
PORT STATE SERVICE VERSION
21/tcp open ftp ProFTPD 1.3.1
22/tcp open ssh (protocol 2.0)
25/tcp open smtp Postfix smtpd
80/tcp open http Apache httpd 2.2.9 ((Debian) PHP/5.2.6-1+lenny3 with Suhosin-Patch mod_ssl/2.2.9 OpenSSL/0.9.8g)
143/tcp open imap Dovecot imapd
443/tcp open ssl/http Apache httpd 2.2.9 ((Debian) PHP/5.2.6-1+lenny3 with Suhosin-Patch mod_ssl/2.2.9 OpenSSL/0.9.8g)
993/tcp open imaps?
3689/tcp open http mt-daapd httpd svn-1696
10000/tcp open tcpwrapped
1 service unrecognized despite returning data. If you know the service/version, please submit the following fingerprint at http://www.insecure.org/cgi-bin/servicefp-submit.cgi :
SF-Port22-TCP:V=4.76%I=7%D=5/15%Time=4A0DCAF2%P=x86_64-unknown-linux-gnu%r
SF:(NULL,20,"SSH-2\.0-OpenSSH_5\.1p1\x20Debian-5\r\n");
MAC Address: 00:03:1C:FF:XX:XX (Svenska Hardvarufabriken AB)
Device type: general purpose
Running: Linux 2.6.X
OS details: Linux 2.6.9 - 2.6.26
Uptime guess: 0.007 days (since Fri May 15 21:56:19 2009)
Network Distance: 1 hop
TCP Sequence Prediction: Difficulty=203 (Good luck!)
IP ID Sequence Generation: All zeros
Service Info: Host: bubba.localdomain; OS: Unix
Read data files from: /usr/share/nmap
OS and Service detection performed. Please report any incorrect results at http://nmap.org/submit/ .
Nmap done: 1 IP address (1 host up) scanned in 118.26 seconds
Raw packets sent: 1020 (45.640KB) | Rcvd: 1016 (41.388KB)
Seems there was interfaces = eth1 in samba.conf. Changed it to eth0 and now it works 
It also is impossible to set the network setting on the webinterface.
EDIT:
Mediatomb fails with
I haven't changed anything in it's config file and also don't see anything malformed.
EDIT2:
It also appears as the mt-daap deamon only advertises itself during startup via Bonjour/avahi. I can still connect to the share with rhythembox when I enter the IP of the server. But it is only automatically dicovered when i force the service to restart.
It also is impossible to set the network setting on the webinterface.
EDIT:
Mediatomb fails with
Code: Select all
2009-05-17 10:53:27 INFO: Loading configuration from: /etc/mediatomb/config.xml
2009-05-17 10:53:27 ERROR: Error parsing config file: /etc/mediatomb/config.xml line 22:
mismatched tag
EDIT2:
It also appears as the mt-daap deamon only advertises itself during startup via Bonjour/avahi. I can still connect to the share with rhythembox when I enter the IP of the server. But it is only automatically dicovered when i force the service to restart.
Code: Select all
2009-05-17 11:47:05 (40cbe9b0): Firefly Version svn-1696: Starting with debuglevel 2
2009-05-17 11:47:05 (40cbe9b0): Error loading plugin /usr/lib/mt-daapd/plugins/ssc-script.so: plugin declined to load
2009-05-17 11:47:05 (40cbe9b0): Plugin loaded: ssc-ffmpeg/svn-1696
2009-05-17 11:47:05 (40cbe9b0): Plugin loaded: daap/svn-1696
2009-05-17 11:47:05 (40cbe9b0): Plugin loaded: rsp/svn-1696
2009-05-17 11:47:05 (40cbe9b0): Starting rendezvous daemon
2009-05-17 11:47:05 (40cbe9b0): Client running
2009-05-17 11:47:05 (40cbe9b0): Starting signal handler
2009-05-17 11:47:05 (40cbe9b0): Initializing database
2009-05-17 11:47:06 (40cbe9b0): Starting web server from /usr/share/mt-daapd/admin-root on port 3689
2009-05-17 11:47:06 (40cbe9b0): Registering rendezvous names
2009-05-17 11:47:06 (40cbe9b0): Serving 219 songs. Startup complete in 2 seconds
2009-05-17 11:47:06 (40cbe9b0): Rescanning database
2009-05-17 11:47:20 (414e84e0): Unknown meta code: daap.daap.songgenre
2009-05-17 11:47:27 (40cbe9b0): Starting playlist scan
2009-05-17 11:47:29 (40cbe9b0): Updating playlists
Thanks for the headsup, I will try to resolve the issues as they arrive in the bug queue. As you might notice, I never tested samba, mediatomb etc... only to the point they executed without direct errors, and as it takes around eight - ten hours to compile the affected packages (per each), It was difficult to set aside time for it.mabl wrote:Seems there was interfaces = eth1 in samba.conf. Changed it to eth0 and now it works
It also is impossible to set the network setting on the webinterface.
EDIT:
Mediatomb fails withI haven't changed anything in it's config file and also don't see anything malformed.Code: Select all
2009-05-17 10:53:27 INFO: Loading configuration from: /etc/mediatomb/config.xml 2009-05-17 10:53:27 ERROR: Error parsing config file: /etc/mediatomb/config.xml line 22: mismatched tag
EDIT2:
It also appears as the mt-daap deamon only advertises itself during startup via Bonjour/avahi. I can still connect to the share with rhythembox when I enter the IP of the server. But it is only automatically dicovered when i force the service to restart.
Code: Select all
2009-05-17 11:47:05 (40cbe9b0): Firefly Version svn-1696: Starting with debuglevel 2 2009-05-17 11:47:05 (40cbe9b0): Error loading plugin /usr/lib/mt-daapd/plugins/ssc-script.so: plugin declined to load 2009-05-17 11:47:05 (40cbe9b0): Plugin loaded: ssc-ffmpeg/svn-1696 2009-05-17 11:47:05 (40cbe9b0): Plugin loaded: daap/svn-1696 2009-05-17 11:47:05 (40cbe9b0): Plugin loaded: rsp/svn-1696 2009-05-17 11:47:05 (40cbe9b0): Starting rendezvous daemon 2009-05-17 11:47:05 (40cbe9b0): Client running 2009-05-17 11:47:05 (40cbe9b0): Starting signal handler 2009-05-17 11:47:05 (40cbe9b0): Initializing database 2009-05-17 11:47:06 (40cbe9b0): Starting web server from /usr/share/mt-daapd/admin-root on port 3689 2009-05-17 11:47:06 (40cbe9b0): Registering rendezvous names 2009-05-17 11:47:06 (40cbe9b0): Serving 219 songs. Startup complete in 2 seconds 2009-05-17 11:47:06 (40cbe9b0): Rescanning database 2009-05-17 11:47:20 (414e84e0): Unknown meta code: daap.daap.songgenre 2009-05-17 11:47:27 (40cbe9b0): Starting playlist scan 2009-05-17 11:47:29 (40cbe9b0): Updating playlists
If the only problem with samba is the eth1 vs. eth0 (most packages are based on the BubbaTwo equivalent as there has been soo many changes since sarge), I will build an new one asap.
/Carl
That's ok for me, samba feels a lot faster now, and firefly finally supports playlists. That's great!carl wrote: Thanks for the headsup, I will try to resolve the issues as they arrive in the bug queue. As you might notice, I never tested samba, mediatomb etc... only to the point they executed without direct errors, and as it takes around eight - ten hours to compile the affected packages (per each), It was difficult to set aside time for it.
I also had to change "read only" to "no" for the homes share since without it no user could write to his own home directory, but don't know what the expected default behavior is here.carl wrote: If the only problem with samba is the eth1 vs. eth0 (most packages are based on the BubbaTwo equivalent as there has been soo many changes since sarge), I will build an new one asap.
But bubba already does most of the things I want it to do. Oh and the kernel does not support ipv6, such a shame... Would be great to have an official new kernel release somewhen
A new kernel is possible, but it is difficult and dangerous, with one wrong step, and the bubba is brickedmabl wrote: But bubba already does most of the things I want it to do. Oh and the kernel does not support ipv6, such a shame... Would be great to have an official new kernel release somewhen
/Carl
I have also tried the new Lenny image:
I didn't have a DHCP-server on my network and that made my Bubba unreachable. It didn't get a static IP of 192.168.0.242 so I tried different IP:s but I couldn't find the right one. So i activated my DHCP-server in my router and there it was... my Bubba! I can confirm that you can't use the web-gui to change Bubba to use a static IP.
Regarding mt-daap (firefly) stop advertise itself:
I used to run the "raw" images (both etch and lenny) and I installed the firefly-package. Firefly would show up in iTunes on my Mac right after a Bubba reboot, but suddenly disappear from iTunes. The only way to get i t back was to restart avahi, mDNS and mt-daapd but then you could only stream music for a little while and suddenly it stopped and firefly had disappeared again from iTunes. To solve this I edited /etc/avahi/avahi-daemon.conf; uncomment the line host-name=foo and changed it to host-name=bubba and rebooted the Bubba (I don't know why I had to make this change in the conf-file, but without it I couldn't get it to work). Then I issued the command ifconfig eth0 promisc and that did the trick! Now it works like a charm, but the only thing is that you need to run the above command everytime you have rebooted your Bubba.
/Markus
I didn't have a DHCP-server on my network and that made my Bubba unreachable. It didn't get a static IP of 192.168.0.242 so I tried different IP:s but I couldn't find the right one. So i activated my DHCP-server in my router and there it was... my Bubba! I can confirm that you can't use the web-gui to change Bubba to use a static IP.
Regarding mt-daap (firefly) stop advertise itself:
I used to run the "raw" images (both etch and lenny) and I installed the firefly-package. Firefly would show up in iTunes on my Mac right after a Bubba reboot, but suddenly disappear from iTunes. The only way to get i t back was to restart avahi, mDNS and mt-daapd but then you could only stream music for a little while and suddenly it stopped and firefly had disappeared again from iTunes. To solve this I edited /etc/avahi/avahi-daemon.conf; uncomment the line host-name=foo and changed it to host-name=bubba and rebooted the Bubba (I don't know why I had to make this change in the conf-file, but without it I couldn't get it to work). Then I issued the command ifconfig eth0 promisc and that did the trick! Now it works like a charm, but the only thing is that you need to run the above command everytime you have rebooted your Bubba.
/Markus
Hi vecka53,
It should be enough by setting the eth0 device in an allmulti mode, not promisc, and it should work. Further more this sounds like a bug since this should have be done during boot (As it is done in the sarge version).
/Tor
It should be enough by setting the eth0 device in an allmulti mode, not promisc, and it should work. Further more this sounds like a bug since this should have be done during boot (As it is done in the sarge version).
/Tor
Co-founder OpenProducts and Ex Excito Developer
For me it only works in promisc mode. I added "up ifconfig eth0 promisc" to /etc/network/interfaces and now it works. Doesn't work with allmulti.tor wrote: It should be enough by setting the eth0 device in an allmulti mode, not promisc, and it should work.
I have not edited the hostname settings as vecka53 did.