Thanks,
Paolol61
New user's registration have been closed due to high spamming and low trafic on this forum. Please contact forum admins directly if you need an account. Thanks !
Amule
i don't think amule can be installed, but you can take a look about mldonkey here:
http://excito.org/forum/viewtopic.php?t=88
http://excito.org/forum/viewtopic.php?t=88
so Amule was my best try 
That's a good occasion to make some linux experience 
Amule, iirc, only work with a graphical interface. Since bubba is an headless system (no display), it can't easily run.
On the other side mldonkey doesn't have a graphical interface, it instead have an http interface, so you control it with a browser as if it was a web application. I like very much this solution as it uses little resources, gives you a graphical interface nonetheless, and i'm able to control my mldonkey over the internet from work
Amule, iirc, only work with a graphical interface. Since bubba is an headless system (no display), it can't easily run.
On the other side mldonkey doesn't have a graphical interface, it instead have an http interface, so you control it with a browser as if it was a web application. I like very much this solution as it uses little resources, gives you a graphical interface nonetheless, and i'm able to control my mldonkey over the internet from work
I have succeeded to install the amule-daemon package on bubba. The instructions are in the following link: http://wejump.ifac.cnr.it/pages/docs/bubba/amule.html
The packages for Debian sarge are available at http://www.backports.org, even if (and just for the ARM architecture...) there is a problem with broken dependencies that prevent the installation. Packages with corrected dependencies can be downloaded from the instructions page linked above.
Note: installation require an upgrade to the official Debian sarge package repositories
The packages for Debian sarge are available at http://www.backports.org, even if (and just for the ARM architecture...) there is a problem with broken dependencies that prevent the installation. Packages with corrected dependencies can be downloaded from the instructions page linked above.
Note: installation require an upgrade to the official Debian sarge package repositories
Re: Amule
# Create a user AMule , after which the client will be executed.
# Install the packages with dpkg . Setup aMule daemon will ask if you want to start the daemon at startup, and the user will be devoted to its operation.
# To simplify the recovery of files, change the configuration of AMule.Incoming and Temp folders to get them directly into the home directory of aMule uses, instead of under hidden-directory configuration.
# Please specify AcceptExternalConnections = 1 in the configuration file to allow connections to AMule client from other computers .
# Open port TCP 4662 and UDP 4665 and 4672 on your network firewall control.
# Install the packages with dpkg . Setup aMule daemon will ask if you want to start the daemon at startup, and the user will be devoted to its operation.
# To simplify the recovery of files, change the configuration of AMule.Incoming and Temp folders to get them directly into the home directory of aMule uses, instead of under hidden-directory configuration.
# Please specify AcceptExternalConnections = 1 in the configuration file to allow connections to AMule client from other computers .
# Open port TCP 4662 and UDP 4665 and 4672 on your network firewall control.